====== Parts ======
  * There is a also a useful [[http://research.janelia.org/labs/display/ephus/ScanImage+Supported+Microscope+Hardware|supported parts]] list for ScanImage software 
===== Laser =====
Coherent Chameleon Vision (A, below). Specs are {{:alex:projects:multiphoton:chameleonvision_ds_final.pdf|here}}

===== Core Microscope =====
Sutter [[http://www.sutter.com/MICROSCOPES/mom.html|MOM]] (Moveable Objective Microscope).

{{:alex:projects:multiphoton:2pscopeaaron.png|}}

  * Fluorescence path
    * Point Grey [[http://www.ptgrey.com/products/grasshopper/grasshopper_firewire_camera.asp|Grasshopper]] CCD camera (A)
    * Olympus tube lens (B)
    * Olympus epi-fluorescence path (from BX51) (C)
    * Mirrors of MOM core (L)
    * Objective lens (variable) (E)
  * Two-photon detection path
    * Objective lens (E)
    * Dichroic mirror in MOM core (L)
    * Hamamatsu PMTs (and collection optics) (F)
    * Hamamatsu pre-amps (G)
  * Other
    * PMT Power supply (H)
    * iMac (O)
    * Power meters (J)
    * Power sensor (K)
    * Stage (D)
    * Cage light (M)
    * Cage (N)
    * Thorlabs cubes (for controlling half-wave plate, fluorescence LED, and shutter (I)
    * Odour presentation manifold (P)
    * Aaron's junk (Q)

==== Scan System ====
Fast scan 6mm mirrors (Cambridge 6215) and scanner driver electronics (includes two Cambridge Technologies 671XX-HP Micromax scanner driver boards)
==== PMTs ====
Hamamatsu H7422 P40-MOD unprotected GAsP PMTs (Hamamatsu part number, H10770PB-40 SEL) and Hamamatsu C3719 pre amps. The power supply is labeled "Sutter PS-2" but it looks suspiciously like two Hamamatsu model C3830 supplies piled into a Sutter box. I can't find any info on the PS-2, but the Hamatsu specs are [[http://www.google.co.uk/url?sa=t&source=web&cd=1&ved=0CBcQFjAA&url=http%3A%2F%2Fwww.sales.hamamatsu.com%2Fassets%2Fpdf%2Fparts_C%2FC3830-22.pdf&rct=j&q=C3830-22.pdf&ei=8e2aTYrpCtSahQf04vDXBg&usg=AFQjCNGDNivxZS6CuiCZA-Scu2JU-hqQrA&sig2=Ux5G2eGF8ECaxZyhX-JLzw&cad=rja|here]] or {{:alex:projects:multiphoton:c3830-22.pdf|here.}}  This is just a guess on my part, so if you are really fussed about these specs, it would probably be best to contact Sutter.
===== Other Parts =====
{{:alex:projects:multiphoton:beampathmod.png|}}
  * Filters/dichroic for detection
    * Chroma
  * Table 
    * Newport Smart Table UT2 with IQ Damping Technology 
  * Attenuation 
    * Thorlabs (WPH05M) rotating half-wave plate (B) and fixed (GL10-B) Glan-Laser polariser (D) to control beam intensity
    * Non-polarising (Thorlabs CM1-BS014) 50:50 beam splitter (F) to divide the beam
    * Variable (Thorlabs BE02-05-B) beam expander (I) to control objective (over/under) filling
  * Power measurement
    * J beam sampler (reflected portion is angle dependent - currently around 3%)
    * L Power meter 
      * note that you need to re-calibrate the linear relationship between power meter reading and power at the objective back aperture if you
      * knock/realign J
      * put telescope in
  * Shutters
    * Thorlabs SH05 (G) This shutter is normally opened by scanImage during a run. Additionally, it is connected to an interlock on the shroud door, forced closed when the door is open. 
  * Beam steering on table
    * Thorlabs mirrors (E, H)
  * Beam trap
    * Thorlabs BT610/M (C, K)
  * PCs for control
    * Lenovo Thinkstation with NI DAQ board (NI 6110E) for ScanImage operation
    * iMac with Micromanager

===== Objectives =====
  * [[https://www.micro-shop.zeiss.com/?s=393578527f2544&l=en&p=uk&f=o&a=v&m=s&id=421452-9900-000|Zeiss 20x]] 1.0 NA M27 (70 mm parfocal, 75 also avail w more DIC)
  * [[http://www.olympusamerica.com/seg_section/uis2/seg_uis2_xlumplflnw_20xw.asp#|Olympus 20x]] 1.0 NA 25 diam
  * [[http://www.olympusamerica.com/seg_section/uis2/seg_uis2_lumplfln_40xw.asp|Olympus 40x]] 0.8 NA (RMS mount)
  * Olympus 25x 1.05 NA (? mount)
  * [[http://www.nikoninstruments.eu/en_GB/Products/Optics-Objectives/Apochromat-Objectives/Lambda-S-Objective-Series/%28specifications%29|Nikon 25x water 1.1 NA with correction collar]]
====== Software ======
  * Svoboda [[http://research.janelia.org/wiki/display/ephus/ScanImage%2C+Ephus%2C+and+other+DAQ+software|ScanImage and Ephus]]


====== Filters for PMTs ======
Alex set up the filter cube for the PMTs as below:
<code>
         RED CHANNEL
       *-------------*
       | HQ605/75 \/ |
   *---*-------------*   
G  |   |\*
R  | E | \*
E  | T |  \*
E  | 5 |   \*
N  | 2 |    \*
   | 5 |     \*
C  | / |      \*
H  | 7 |       \*
A  | 0 |        \*
N  |   |         \*
N  |   |          \*
E  | > |           \*
L  |   |            \*
   *---*
</code>
The filters are by Chroma and the arrows point towards the coated side.